Sunday, September 2, 2012

Product Review KP02A body review, & comparison with HT's ...

KP02A body review, and side-by-side comparison with HT's (Noland/Barney Ross/Whiplash) body variant.

Some have requested a direct comparison between the 2.

Quote:

Originally Posted by Kaustic Plastik

I really hope to have your feedbacks, suggestions, critics!!

Feedbacks, Suggestions and Critiques... This would be all three.

Quote:

Originally Posted by Kaustic Plastik

It's between the model used in Expendables and T-800

More of the former by more ways than one.

Review
1. As suspected by myself and few others, KPA02 is "base on" HT Barney Ross/Whiplash body. A more accurate description is: KP used the base HT body and:
a) Adding sculpt to the exterior ot the torso, abs, arms and legs so that it varies from HT's.
b) The pelvis shape (exterior/function) remains mostly unchanged except for the slight shift of the screw holes.
c) The slight changes to shoulder rotation pin that (inadvertently) makes the Arms modular (you can pop it out of the socket).
d) The internals are almost 100% "recast" based on HT's body. Hence, good replacement/swappable parts with HT's bodies.
e) The whole body from the hips/pelvic region to the top of tip of the neck is the same length as the HT's, the upper legs are longer by approx 0.5 cm, while lower legs would be the same/similar to the extended lower legs (together with extended pegs option too) of HT variants, with standard TT lower legs it's approx 1.7cm longer. Proportionally, KP's legs seems too long.

The Good/Improvements:
1. Materials used are of good (I'd put it: preferred) quality. It gives some flexing while materials used by HT are more rigid which tends to break.
2. Thick PVC material used for the upper torso (which brings a weakness). HT's very thin by comparison.

The Bad/Weakness:
1. The far too thick PVC of the upper torso around the rib area, making it like fat build-up in odd places.
2. The knees bent has far too sharp angles jutting out.
3. The base of the neck is rather loose, so adjustment through a screw at the back would alleviate this, but you can't (which will be discuss in "the ugly").
4. Because of the pin design of the shoulders, it would be more prone to be loose, swinging back and forth over- a-time-course/frequent posing.

The Ugly:
1) The claims as a complete in-house KP 3D CAD design.
2) Drill out (Stripping) the "philips" screw head of the 3 screws holding the internal torso together, so no typical screw driver can "expose" further internals. Well, it took me all of 5 minutes dremel, to get the screw to be fully functioning again, I do appreciate a good mental challenge/obstacle. The QUESTION: Why create such an inconvenience? (I'll leave it at that)

Personal opinions:
KP did recreate a good alternative body (or duplicate body) with some weaknesses and some improvements. Being a retail product this is bound to be dissected to its basic components and be exposed for what it is. I personally disagree with the claims made. I would call a square, a square. Be it HT or any other companies, they would expect their products to be dissected with appropriate merits/credits to novelty of design.

Note on pics, I've used a compact wide angle camera so there will be some perspective distortion.... I could always break out my DSLR with macro-lens
Pictures: Left (KP02A): Right (Noland's body)

Pelvis:

Abdomen:

Upper Torso:

Odd sharp knees:

Arms/shoulder joint:

Proof on concept. The interchangeable parts of KP's and HT's bodies. Note, because of slight difference in sizes you can't by default use Noland's hips and legs on KP02A's pelvis, a minor mod will be needed to do so (as seen, you'll have no problems doing the opposite). Right: Hybrid as indicated by the colour. KP's inner neck peg and Arms/Shoulders on Noland's inner & outer upper torso, connected to KP's abdomen which is in turn to Noland's Pelvic and again to KP's hips and legs:

Odin's body: KP02A, (arms' obviously different) this is length/proportion comparison:

Needless to say I disagree with the following comments (with proof), "and why the bias?" is all that I'll add.:

Quote:

Similar, yes, copy, hell no!

Give the guy a break, he's just starting out and needs all the support he can get. We all have to start somewhere!

CHEERS!

Quote:

People seem to have serious issues of perception that I don't understand. If people can't tell the difference between the Iron Man Mark III and Mark IV designs even when side by side. I am not surprised that they can tell the difference between two similarly sized 1/6 scale human bodies.

The Kaustic body is very different from any of the HT bodies in many ways. It's clearly a made-from-scratch body that uses some similar articulation.

Quote:

I don't understand what you are getting at? Wouldn't you expect that 2 simalarily sized body builders to have similar proportions? Yes the side by side pics look similar. Similar in that that they are both muscular and have normal body parts. The design of the body though is vastly different. I don't know how much it cost to design a body but I guess it would be Thousands if not Tens of Thousands. I know if I had a company and spent that kind of money I would be offended if someone came along and said "but it's a recast of Hot Toys".

p.s. Take a product for what it is... alot of people do appreciate the availability and variation that KP bodies provide.

Source: http://www.onesixthwarriors.com/forum/sixth-scale-action-figure-news-reviews-discussion/637918-kp02a-body-review-comparison-hts-noland-barneyross-whiplash-body-var.html

michelle obama adam lambert arrested barkley beltran space ball jim mora the weeknd echoes of silence

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.